Brake is the braking system on machinery and equipment, we know that in the working process of the mechanical equipment mainly depend on the braking system to achieve production downtime, and if problems once the brake system will bring great influence.
For example, automobile brake is on the brake, if once the brake failure, consequences, so in order to ensure the safety of the work smoothly, be sure to regularly to maintain, brake specific maintenance methods are as follows:
1. Add lubricant to the movable part of the electromagnetic brake.
2. Check the length of armature stroke regularly.
Because during the operation of the brake, due to the abrasion of the cutting surface, the length of the armature will be **.
When the length of the armature stroke is less than normal, it must be adjusted to restore the minimum clearance between the brake surface and the rotary disc.
If the armature stroke length is above normal, the suction may be greatly reduced.
3. If the worn brake surface is replaced, the minimum clearance between the brake surface and the rotary table should be adjusted properly.
4. Check the fastening degree of bolts, especially bolts of electromagnet, bolts of electromagnet and shell, bolts of magnetic yoke, bolts of electromagnet coil and wiring bolts.
5. Regularly check the mechanical wear of movable parts, and remove dust, flowers and dirt on the surface of electromagnet parts.