+86-373-8614444
YPZ2‑Ⅰ355/Ed30/5 Electro-hydraulic Disc Brakes video

YPZ2‑Ⅰ355/Ed30/5 Electro-hydraulic Disc Brakes

YPZ2-Ⅰ355/Ed30/5 Electro-hydraulic Disc Brake 📋 Product Overview The YPZ2-Ⅰ355/Ed30/5 is a highly reliable, normally-closed electro-hydraulic disc brake. It serves as a mainstream safety braking device for lifting, mining, and metallurgical industries. Equipped with an Ed30/5 thruster, this...

Description

YPZ2-Ⅰ355/Ed30/5 Electro-hydraulic Disc Brake

📋 Product Overview

The YPZ2-Ⅰ355/Ed30/5 is a highly reliable, normally-closed electro-hydraulic disc brake. It serves as a mainstream safety braking device for lifting, mining, and metallurgical industries. Equipped with an Ed30/5 thruster, this brake operates on a "power-off braking, power-on releasing" principle. It is specifically designed for deceleration and parking braking in bridge/gantry cranes, port handling machinery, belt conveyors, mine hoists, and metallurgical rolling equipment.


⚙️ Technical Specifications

Parameter Specification
Brake Model YPZ2-Ⅰ355
Thruster Model Ed30/5
Disc Diameter 355 mm
Brake Type Normally-closed (Fail-safe)
Power Supply AC 380V 50Hz (60Hz or other voltages customizable)
Standards Compliant German DIN15435 Standard

🌡️ Operating Conditions

Ambient Temperature: -20℃ ~ +50℃

Relative Humidity: ≤ 90%

Environment: No flammable, explosive, or corrosive gases.

Special Requirements: For temperatures below -20℃, a thruster heater or YH-10 aviation hydraulic oil is recommended. Anti-corrosion painting is available for outdoor or marine environments.


✨ Main Features

Fail-Safe Design: Operates as a normally-closed brake. When powered off or in case of failure, the brake springs rapidly pull the brake arms to clamp the disc, ensuring high emergency braking reliability.

Equalized Release Clearance: The Type Ⅰ frame features a standard release equalization device, ensuring the release clearance of both brake shoes remains perfectly balanced during operation.

Maintenance-Free Pivots: All main swinging hinge points are equipped with self-lubricating bearings, offering high transmission efficiency and long service life without the need for lubrication.

Intuitive Torque Adjustment: The brake spring is housed in a square steel tube with a built-in torque scale on one side, allowing for direct reading and easy, intuitive adjustment of braking force.

Easy Lining Replacement: Features a plug-in style, asbestos-free brake lining. The cartridge-type structure allows for quick replacement without disassembling the entire unit.

Fast Response Time: The brake closing (braking) time is exceptionally fast, ranging from 0.25s to 0.4s.


🔧 Optional Additional Devices

S (Manual Release Device): Allows for manual brake release and disc turning during maintenance or power failure.

K1 (Release Limit Switch): Provides a signal to the PLC indicating the brake is successfully opened.

K2 (Closed Limit Switch): Provides a signal indicating the brake is fully closed.

K3 (Lining Wear Limit Switch): Automatically triggers an alarm or停机 (shutdown) signal before the brake lining reaches its wear limit.

M (Automatic Wear Compensation): Automatically adjusts the clearance as the brake lining wears, keeping the braking torque and release gap constant.

Heater: For low-temperature environments.


🏭 Working Principle

Power-On (Brake Release): The Ed30/5 thruster receives power. The internal motor drives the hydraulic oil to build pressure, pushing the rod upward to spread the brake arms. The brake shoes separate from the disc, allowing the shaft to rotate freely.

Power-Off (Brake Application): The thruster loses power, and hydraulic pressure disappears. The brake springs quickly pull the brake arms together, clamping the brake shoes tightly against the disc to achieve friction braking.

Hot Tags: ypz2‑ⅰ355/ed30/5 electro-hydraulic disc brakes, China, manufacturers, supplier, factory, customized

Send Inquiry

(0/10)

clearall