YWZ8-400/E80A ELECTRO HYDRAULIC And DRUM BRAKE

How much hydraulic oil should be added to the electro-hydraulic push rod?
　
The principle of refueling must be to ensure that the electro-hydraulic push rod works normally.
Method of refueling:
Electrohydraulic push rod
It is often used in places such as high altitude where the environment is harsh and the operation is inconvenient. Therefore, we recommend users to refuel and debug in places where the ground is easy before installing the electro-hydraulic push rod, so as to avoid unnecessary troubles caused by inadequate refueling or excessive oil spilling due to equipment refueling at high altitude or places inconvenient for observation.

1.
Electrohydraulic push rod
Use in horizontal position, open
Electrohydraulic push rod
Oil directly at the inspection port, and start the power supply when the hydraulic oil level line completely submerges the oil circuit, so as to ensure that the piston rod of the electro-hydraulic push rod is completely born;
2.
Electrohydraulic push rod
When using in inclined position or vertical position, please refuel at the oil filler at the highest point of the electro-hydraulic push rod. When it is enough, start the power supply to ensure that the piston rod of the electro-hydraulic push rod is fully extended. If the piston rod cannot be retracted, add hydraulic oil, but not too much, to avoid the phenomenon of oil injection caused by the complete retraction of the piston rod.
At the same time, the manufacturer's product design should pay attention to the fact that the fuel tank design is consistent with the actual oil consumption to avoid the phenomenon of "oil leakage" or "oil shortage".

Hot Tags: ywz8-400/e80a electro hydraulic and drum brake, China, manufacturers, supplier, factory, customized, Electro Hydraulic Thrustor Brake, Metallurgical equipment drum brake, Belt conveyor drum brake, Series YW K acc to DIN 15 435, high efficiency drum brakes, YW K series electro hydraulic drum brakes