🛠️ Product Overview: DYTZW3000 Electro-Hydraulic Pusher
The DYT series is characterized by its integration of an electric motor, hydraulic pump, and cylinder into a single unit. It operates on a "push-on-power" principle, making it ideal for releasing spring-applied brakes.
Model Number: DYTZW3000
Type: Electro-Hydraulic Pusher / Thruster
Action: Push (Extend) on Power On.
When powered, the motor generates hydraulic pressure to extend the piston rod.
When power is cut, a spring (or external load) returns the rod to its original position.
Key Feature: Integrated Design. No external piping is required, eliminating leaks and simplifying installation.
📋 Key Technical Specifications
表格
| Parameter | Specification for DYTZW3000 |
|---|---|
| Thrust (Pushing Force) | 3000 N |
| Stroke Length | Varies (e.g., 50mm, 100mm - depends on specific sub-model) |
| Motor Power | 260 W (Typical for this force range) |
| Power Supply | AC 380V / 50Hz (3-Phase) |
| Insulation Class | B / F Class |
| Protection Level | IP54 / IP55 |
| Weight | Approx. 35 kg |
✨ Key Features
Leak-Proof Design: The hydraulic system is fully enclosed within the unit. Unlike traditional hydraulic stations with external hoses, there is no risk of oil leakage, preventing environmental pollution and maintaining a clean workshop.
Low Noise: Operates with lower noise levels compared to traditional hydraulic systems or electromagnetic actuators.
Long Service Life: Features chrome-plated piston rods and high-quality seals to resist wear and corrosion.
Wide Application: Suitable for metallurgy, mining, port machinery, and chemical industries.
🏭 Typical Applications
The DYTZW3000 is primarily used to drive the following devices:
Brakes: Actuating block brakes (e.g., YWZ series) and disc brakes on cranes, hoists, and conveyors.
Valves & Gates: Operating industrial valves, sluice gates, and dampers.
Process Equipment: Used in mechanisms requiring linear motion such as clamping devices on assembly lines.
💡 Operational & Maintenance Tips
Oil Level: Regularly check the hydraulic oil level in the reservoir. Top up with the specified oil (e.g., DB-25) if necessary.
Heating Option: If operating in environments below 0°C, it is recommended to install a heating element to ensure proper oil viscosity.
Limit Switches: Can be equipped with auxiliary travel switches to provide position feedback (e.g., "Brake Open" or "Brake Closed" signals).
Mounting: Ensure the mounting brackets are secure to handle the thrust forces during operation.
