The maintenance of the block brake needs to pay attention to it.
1. The brake system must be sensitive, and the shaft hole must be added once a week. If there is a failure situation, it should be added to lubrication and loose in time.
2, the brake is quick to uniformly close to the brake wheel, the gap on both sides of the brake wheel is equal, and then adjusted.
3. When the wear of the brake belt exceeds 50% of its thickness, it should be replaced immediately.
4, after the current is turned on, it must be checked whether the hydraulic pusher is suitable, the temperature of the electromagnet is not more than 105 degrees, and if the length is not suitable, it should be adjusted in time.
5, the surface of the brake wheel must be smooth, if the depression or scratches are found, the brake should be replaced. If you find that there is stains or oil stains, you should clean it in time.
6. The brake wheel operates to smoke or makes a octrum, indicating that the temperature of the brake is too high, and the gap between the tile and the brake wheel must be adjusted.
