1. Installation Methods
- It is designed for assembly on the brake disc of drive shafts, main shafts and reel shafts of industrial machinery.
- Keep the brake body parallel to the brake disc during installation, and ensure uniform gap between friction pads and the disc surface all around.
- Fasten the base firmly with high-strength bolts; avoid vibration and position offset during operation.
- Reserve sufficient space for later inspection, pad replacement and manual release operation.
2. Matching Standard Accessories
Main Supporting Components
Hydraulic Power Unit
Special hydraulic station for power supply and pressure regulation, provides stable working hydraulic pressure for normal braking and release.
Hydraulic Hoses & Pipe Fittings
High-pressure resistant oil pipes and connectors, connecting the brake and hydraulic station to deliver hydraulic oil.
Limit Switches
Detect brake opening and closing status, feed back signals to the control system for interlock protection.
Manual Release Device
Hand lever for emergency brake release when power or hydraulic pressure fails, convenient for equipment maintenance.
Wear Parts & Spare Parts
Friction Pads
Consumable core parts, high wear-resistant material; easy to disassemble and replace.
Sealing Kits
Including oil seals and gaskets, for regular replacement to prevent oil leakage.
3. Optional Custom Accessories
- Buffering components for impact reduction
- Explosion-proof electrical components for hazardous areas
- Mounting brackets and transition plates for special installation positions
- Position sensors and remote monitoring modules
