The main role of the brake is the brake deceleration effect. Whether the brake is capable of normally use the installation of our installation.
Brake maintenance method:
1. Keep the brake disk of the brake and the surface of the brake lining, ensure that the brake can be freely used, flexible and reliable.
2, often observe the stock in the brake fluid, when the page is lower than the marker line, the original colored brake fluid must be added to the same height than the marker line 3-5 mm. It is forbidden to mix other brakes.
3, regularly check the brake discharge, and must be replaced when the wear is less than the specified value.
4. During use, the surface of the brake lining does not allow the grease or braking liquid, and requires periodic inspection of the lining, the thickness is less than the predetermined value, and the lining is replaced.
5. When the header is leaked, the seal is replaced when the pump piston is leaked. The new seal needs to be soaked in the brake fluid 75 laughing and then replacing the mulberry, and it cannot be used immediately.
