Suitable for horizontal or vertical axis braking. When the horizontal axis brake mode is used, it can be installed at any angle around the brake disc; when the vertical axis brake mode is used, the angle is not limited, one brake disc can be installed with one brake, or two or more brakes can be installed. However, when installing two or more units, it is recommended to install them as symmetrical as possible. Regarding the type of installation chosen, the mounting surface must be perpendicular to the axis of the brake disc.
When the brake is mounted on the rotating side, the necessary torque is reduced, the heat dissipation performance is increased, and a small model can be used, which is economical. When it is required to stop the accuracy, please use the brake on the low speed side as much as possible.
