1. Pneumatic brake device with good ventilation safety cover or other safety measures.
2. Confirm the surrounding environment before installing the pneumatic brake. If it is exposed to moisture, oil, dust, vibration, impact, or high humidity environment, it will directly affect the service life and performance of the pneumatic device.
3. Do not increase the number of revolutions without exceeding the allowable number of revolutions. If the number of rotations exceeds the allowable number of rotations, the vibration will increase, and depending on the situation, it may be damaged, flying, and other very dangerous conditions. Be sure to install a protective cover when using it at the allowable number of rotations.
4. The friction plate used should not be wetted with water or grease, otherwise it will affect the torque or working performance.
5. Pneumatic brakes must be used within the allowable connection and braking workload. During operation, if it exceeds the allowable connection brake workload, it will cause increased heat generation, and the friction surface will become red and hot. Excessive heat is very likely to cause fire. In addition, it will directly affect the performance of the pneumatic brake, so be sure to use it within the brake work that allows connection.
