The brake is the braking system on the mechanical equipment. We know that in the working process of the mechanical equipment, the brake system is mainly used to realize the shutdown of production, and if there is a problem with the braking system, it will have a great impact.
In order to ensure the safety and smooth progress of the work, the brakes must be regularly maintained. The specific maintenance methods are as follows:
1. Lubricant is often added to the movable part of the electromagnetic brake.
2. Regularly check the length of the armature stroke. Because during the operation of the brake, due to the wear of the profile surface, the stroke length of the armature will change. When the armature stroke length does not reach the normal value, it must be adjusted to restore the small gap between the braking surface and the turntable. If the armature stroke length exceeds the normal value, the suction power may be reduced.
3. If the worn braking surface is replaced, the small gap between the braking surface and the turntable should be properly adjusted again.
4. Always check the tightness of the bolts, especially the bolts of the electromagnet, the bolts of the electromagnet and the shell, the bolts of the yoke, the bolts of the electromagnet coil and the wiring bolts.
5. Regularly check the mechanical wear of the movable parts, and clean the dust and dirt on the surface of the electromagnet parts.
