+86-373-8614444
Ed Explosion Protected And Electro Hydraulic Thrusters

Ed Explosion Protected And Electro Hydraulic Thrusters

summary Ed series electro-hydraulic drive is a very compact drive control device integrating motor, centrifugal pump and oil cylinder. It is widely used as the drive device of various block brakes and disc brakes, and can also be used for the drive control of various industrial valves, gates, directional swing and rotation devices (mechanisms) and clamping devices.

Description

summary
Ed series electro-hydraulic drive is a very compact drive control device integrating motor, centrifugal pump and oil cylinder. It is widely used as the drive device of various block brakes and disc brakes, and can also be used for the drive control of various industrial valves, gates, directional swing and rotation devices (mechanisms) and clamping devices.

 

Fourth, additional devices
According to the needs of users, various additional devices can be installed to meet different work needs;
Ascending or descending valve: the ascending valve "H", descending valve "S" or ascending and descending valves "H, S" can extend the ascending and descending time infinitely, and the adjustable value can reach 10-20 times of the rated value, and the valve can be adjusted externally. With the valve, the rising and falling time will be prolonged, the short stroke will be prolonged by 0.1-0.2 seconds, and the long stroke will be prolonged.
0.2-0.4 seconds;


Brake spring: it generates braking force, and the braking spring force value listed in the technical parameters is the elastic force when it is 1/3 of the ascending stroke (2/3 of the descending stroke).
Reset spring: the working principle is the same as that of C- spring, but the reset spring force is less; Buffer spring: (only applicable to short stroke) mainly regulates the braking process. Buffering the non-periodic transient process of braking makes the braking stable. It is installed on the piston rod instead of the connecting block of the push rod and does not change the stroke of the pusher.
Heater: In areas where the ambient temperature is below -20℃, heaters can be installed according to users' needs. The heaters are AC200V and AC110V V. When ordering,
The temperature control and adjustment method is selected by the user himself;
Travel switch: according to user's requirements, the pusher can be equipped with a mechanical travel switch.

Hot Tags: ed explosion protected and electro hydraulic thrusters, China, manufacturers, supplier, factory, customized

Send Inquiry

(0/10)

clearall