Products

Industrial Hydraulic Fail-Safe Brakes Industrial Brake

Fail-Safe Brakes Industrial Brakes are high-power braking devices which .can be wildly used as emergency safety brake on low speed shafts for the lifting control and pitching mechanism of various large and middle crane、port handling machinery. They are also applied for the same purpose for mine winder ,lifter ,elevators ,belt Conveying machinery ,cable cars, foundry and cable cranes and so on.

Send Inquiry

Description

Spring braking- Hydraulic release- Suitable for Disc Thickness of 30 mm

Advantages
1. Compact structure
2. Large braking torque
3. Easy installation
Applied field
Lifting transportation, metallurgy, mining, ports, construction machinery , cable sling equipment, wind turbines, textile machinery and other industries.

Use Condition
Environment temperature: -20ºC~50ºC
There is no flammable, explosive gas in the ambient.
Air relative humidity is less than 90%.
The altitude of the place of use is in accordance with GB755-2000.
The anti-corrosion products should be used for outdoor rain and snow erosion or corrosive gas and medium.
Working brake

Allows the braking of the high frequencies.

Low maintenance costs,the brake compensation device(the stable braking torque) is equipped with pad wear , short respond time.

Mounting tolerances, brake disc face beats: max +/-0.2 mm. The vertical deviation of base relative to disc: max +/- 4%. The deviation from brake disc relative to the center of the base: max +/- 2.5 mm.

3SH brake(hydraulic release). Hydraulic station should be matched when working.

Safety Brake

Large braking force, same with working brakes.

Used as an emergency brake in case of over speeding, Normally the static brake has short respond time.

Mounting tolerances, brake disc face beats: max +/-0.2 mm. The vertical deviation of base relative to disc: max +/- 4%.

Need power unit when working.

SB/SBD Fail Safe Brake/Emergency Brakes:

SB-50 Safety Brake