Contact Us
- Wei Four Road, Weizhuang industrial Park, Changyuan District, Xinxiang City, Henan Province, China
- sales@zybc.com
- +86-373-7136666
YWZ4-A Series Drum Brake YWZ4-160/18A
YWZ4-A series drum brake YWZ4-160/18A The YWZ4-160/18A is a medium-duty industrial drum brake belonging to the YWZ4-A improved series, engineered for reliable deceleration, load-holding, and emergency safety control of small-to-medium rotating machinery. Classified as a fail-safe,...
Description

YWZ4-A series drum brake YWZ4-160/18A
The YWZ4-160/18A is a medium-duty industrial drum brake belonging to the YWZ4-A improved series, engineered for reliable deceleration, load-holding, and emergency safety control of small-to-medium rotating machinery. Classified as a fail-safe, spring-engaged, electro-hydraulic released brake, it features an optimized "A-type" structure (enhanced rigidity and corrosion resistance) and is paired with a dedicated electro-hydraulic thruster for stable actuation. The model designation (YWZ4-160/18A) clarifies its core parameters: "YWZ4-A" for the improved 4th-generation drum brake series, "160" for the brake drum diameter (160 mm), "18A" for the matched thruster model (ED18/6, with "A" denoting compatibility with the YWZ4-A series), and it adheres to international and national industrial standards for braking performance. Widely used in general industry, metallurgy, and light logistics, it ensures safe operation under loads of 150–500 tons and moderate harsh conditions (dust, normal temperature ranges).
Products Description
1. Model Interpretation & Core Function
The YWZ4-160/18A's model code directly reflects its design orientation, matching components, and performance scope, enabling quick equipment pairing:
| Model Segment | Meaning |
|---|---|
| YWZ4-A | Improved 4th-Generation Drum Brake Series ("A" = optimized structure for rigidity/corrosion resistance) |
| 160 | Brake drum diameter: 160 mm (medium-sized drum for light-to-medium loads) |
| 18A | Matched electro-hydraulic thruster: ED18/6 model ("A" = dedicated for YWZ4-A series compatibility) |
Its core functions focus on safety and control for medium-duty machinery, aligning with industrial braking needs:
Routine Braking: Smoothly decelerates or stops machinery during normal operation, adapting to intermittent (S3-60%) or short-term continuous duty cycles.
Emergency Stopping: Rapidly engages in power loss, thruster failure, or overspeed (≥110% of rated speed) to prevent machinery runaway and avoid material spillage or equipment damage.
Static Load Holding: Secures loads (e.g., lifted goods, conveyor materials) during downtime, maintenance, or power outages, ensuring no accidental movement of the mechanical system.
2. Working Principle
The YWZ4-160/18A operates on a fail-safe principle (spring force for braking, electro-hydraulic thrust for release), ensuring inherent safety even if the actuation system malfunctions. Its working cycle consists of three key states:
2.1 Brake Engagement (Safety State)
When the machinery is stationary, in emergency mode, or powered off, internal high-tension compression springs (65Mn steel) expand outward.
The spring force pushes two arc-shaped brake shoes to swing outward, pressing the friction pads (attached to the shoes) tightly against the inner wall of the rotating brake drum.
Friction between the pads and drum generates a stable braking torque (180–280 N·m), which resists the drum's rotation and eventually stops the connected mechanical shaft-or holds it in a stationary position.
2.2 Brake Release (Operating State)
When the machinery needs to start, the matched ED18/6 electro-hydraulic thruster is activated. The thruster converts electrical energy into linear hydraulic thrust (180 N).
This thrust pulls the integrated lever mechanism, compressing the internal springs and retracting the brake shoes inward. A 0.3–0.6 mm clearance is created between the friction pads and the drum.
The brake drum then rotates freely with the mechanical shaft, allowing the machinery to operate normally (e.g., conveyor movement, hoist lifting).
2.3 Emergency Response (Fault State)
In the event of power loss, thruster oil leakage, or emergency shutdown signals, the thruster's thrust dissipates instantly.
The compressed springs rebound within ≤0.4 seconds, driving the brake shoes to re-clamp the drum-engaging the brake rapidly to stop the machinery and eliminate safety hazards.
3. Core Structure & Key Components
The YWZ4-160/18A features an optimized modular design with four critical subsystems, balancing durability, maintainability, and performance:
3.1 Brake Drum & Shoe Assembly (Friction Core)
Brake Drum: 160 mm in diameter, made of HT250 gray cast iron (higher strength than HT200) with a quenched inner surface (hardness HB 200–240). This ensures wear resistance and heat dissipation, avoiding thermal deformation during high-frequency braking. It is mounted on the mechanical shaft via a keyway and locking nut.
Brake Shoes: Two arc-shaped Q235 steel shoes (thickness: 8–10 mm) with reinforced edges to prevent deformation under spring force. Each shoe is lined with a resin-ceramic composite friction pad (thickness: 12 mm), which can be installed via riveting or insertion (two options for user convenience).
Shoe Hinge: A cast steel hinge with wear-resistant brass bushings, ensuring smooth swinging of the shoes during engagement/release and reducing friction-induced wear.
3.2 Actuation & Spring Mechanism (Power Core)
Matched ED18/6 Electro-Hydraulic Thruster: Provides 180 N of linear thrust to release the brake. It integrates a three-phase AC motor (380V/50Hz, power: 0.12 kW), a centrifugal hydraulic pump, and a sealed cylinder. The thruster's "A-type" adaptation ensures perfect alignment with the YWZ4-A series' lever layout.
Compression Springs: Two high-strength 65Mn steel springs (diameter: 12–15 mm) arranged symmetrically to provide uniform clamping force (3.5–5.0 kN). A hexagonal adjustment nut on the spring seat allows fine-tuning of the spring preload to adjust braking torque.
Reinforced Lever Mechanism: Two steel levers (material: 45# steel, thickness: 6 mm) with welded reinforcing ribs, ensuring no deformation under the thruster's thrust. The lever pivot uses a sealed bearing to reduce friction and extend service life.
3.3 Safety & Control Components (Control Core)
Dual Limit Switches: Standard-equipped position sensors (one for "fully engaged," one for "fully released") with IP65 protection. They send digital signals to the machinery's PLC, enabling interlock control-ensuring the main machine can only start when the brake is released, and stops immediately if the brake fails to engage.
Pad Wear Indicator: An optional inductive sensor installed on the shoe support. It triggers an alarm when the friction pad thickness is reduced to ≤3 mm, reminding maintenance personnel to replace pads in time.
Manual Release Lever: A mechanical lever mounted on the thruster's cylinder. It allows manual retraction of the thruster rod during power loss, enabling maintenance or emergency reset of the machinery.
3.4 Mounting & Protection Components (Durability Core)
Adjustable Mounting Base: A steel base (material: Q235) with elongated slots (length: 20 mm) for ±8 mm horizontal/vertical adjustment. This simplifies alignment with the brake drum during on-site installation, even if there are minor deviations in the mechanical shaft position.
Environmental Protection Cover: A sheet metal cover (thickness: 1.5 mm) with IP55 protection, shielding internal components (shoes, springs, levers) from dust, water splashes, and small debris. For outdoor or corrosive environments, an optional epoxy-coated "anti-corrosion cover" is available.
Anti-Rust Coating: All external metal components (base, levers, cover) are coated with two layers of epoxy resin (total thickness: 80–100 μm), resisting rust in humid environments (relative humidity ≤90%) and extending the brake's service life.
4. Key Features & Advantages
The YWZ4-160/18A stands out among medium-duty drum brakes for its optimized performance, safety, and adaptability, with core benefits:
4.1 Enhanced Structural Rigidity (A-Series Advantage)
Compared to the standard YWZ4 series, the "A-type" optimized structure (reinforced levers, thicker shoe plates, and rigid hinges) reduces deformation under high torque by 30%, ensuring stable braking torque (±2% of nominal value) even after long-term use.
4.2 Fail-Safe Reliability
The spring-engaged design eliminates the risk of machinery runaway caused by power loss or thruster failure-critical for lifting and conveying equipment where safety accidents could lead to material damage or personnel injury.
4.3 Flexible Maintenance & Long Pad Life
Friction pads support both riveted and inserted installation: inserted pads can be replaced in ≤15 minutes without disassembling the brake body, while riveted pads offer higher bonding strength for high-frequency braking scenarios.
Resin-ceramic composite pads have a low wear rate (≤0.1 mm per 1000 working hours) and a service life of ≥12,000 working hours-50% longer than traditional resin pads.
4.4 Wide Environmental Adaptability
Operates in a temperature range of -20°C to +50°C, compatible with most indoor industrial environments and mild outdoor conditions.
IP55 protection (standard) and optional anti-corrosion coating enable use in light dust (e.g., cement workshops) or humid environments (e.g., coastal logistics yards).
4.5 Standard Compliance & Compatibility
Adheres to GB/T 18839 (Chinese standard for industrial brakes) and JB/T 6406-2006 (technical requirements for electro-hydraulic drum brakes), ensuring compatibility with domestic and international mechanical equipment.
The ED18/6 thruster is a universal model, making replacement easy and reducing maintenance costs (no need for custom components).
5. Typical Applications
The YWZ4-160/18A is widely used in medium-duty industrial scenarios requiring reliable braking and safety control:
5.1 Light Lifting & Hoisting Equipment
Small Cranes: Jib cranes (≤10 tons) and mini gantry cranes in workshops, warehouses, and construction sites-providing stable braking during load lifting and holding, ensuring precise positioning of goods.
Electric Winches: Medium winches (1–5 tons) for lifting small machinery parts, building materials, or logistics packages-preventing load slippage during shutdowns.
5.2 Conveying & Material Handling Systems
Light Belt Conveyors: Belt conveyors (bandwidth 500–800 mm) in food processing plants, electronics factories, and cement mixing stations-especially inclined conveyors (≤20°), where the brake prevents material backflow during stops.
Roller Conveyors: Heavy-duty roller conveyors for wooden pallets or metal containers in logistics centers-enabling segmental control of conveyor start/stop to avoid material stacking.
5.3 General Industrial Machinery
Small Gearboxes & Pumps: Auxiliary gearboxes for textile machinery, printing presses, and water treatment pumps-providing quick braking to stop the equipment within the required time and avoid process errors.
Metallurgical Auxiliary Equipment: Small-scale ore crushers and powder mixers in non-ferrous metal mines-withstanding light dust and ensuring safe shutdown during maintenance.
5.4 Special Environment Applications (Optional)
Explosive Environments: Optional explosion-proof model (Exd IIB T4 Ga) for chemical workshops or light mining areas with flammable gases-using explosion-proof thrusters and sealed electrical components to eliminate ignition risks.
Outdoor Wet Environments: Optional anti-corrosion model (with 304 stainless steel fasteners and EPDM seals) for coastal logistics yards or outdoor storage areas-resisting salt spray and rain erosion.
Hot Tags: ywz4-a series drum brake ywz4-160/18a, China, manufacturers, supplier, factory, customized, Cart running machine drum brake, Special cranes drum brake, Riveting crane drum brake, General bridge drum brake, Non lifting winch drum brake
You Might Also Like














