+86-373-8614444
Ed-23 Electro Hydraulic Pusher

Ed-23 Electro Hydraulic Pusher

Fourth, additional devices According to the needs of users, various additional devices can be installed to meet different work needs: Ascending or descending valve: installing ascending valve "H", descending valve "S" or ascending and descending valves "H, S" can extend the ascending and descending time infinitely, and the maximum adjustable value can reach 10-20 times of the rated value, and the valve can be adjusted externally. The rising and falling time of the pusher with valve will be prolonged, the short stroke will be prolonged by 0.1-0.2 seconds and the long stroke will be prolonged by 0.2-0.4 seconds;

Description

Fourth, additional devices
According to the needs of users, various additional devices can be installed to meet different work needs:
Ascending or descending valve: installing ascending valve "H", descending valve "S" or ascending and descending valves "H, S" can extend the ascending and descending time infinitely, and the maximum adjustable value can reach 10-20 times of the rated value, and the valve can be adjusted externally. The rising and falling time of the pusher with valve will be prolonged, the short stroke will be prolonged by 0.1-0.2 seconds and the long stroke will be prolonged by 0.2-0.4 seconds;
Brake spring: it generates braking force, and the braking spring force value listed in the technical parameters is the elastic force when it is 1/3 of the ascending stroke (2/3 of the descending stroke).
Reset spring: the working principle is the same as that of C- spring, but the reset spring force is less;
Slow spring: (only suitable for short stroke) mainly regulates the braking process. The non-periodic transient process of intermediate braking makes the braking stable. It is installed on the piston rod instead of the connecting block of the push rod and does not change the stroke of the pusher.
Heater: In the area where the ambient temperature is lower than-20, a heater can be installed according to the needs of users. The voltage of the heater is AC200V and AC110V V. Please note when ordering, and the temperature control and adjustment method is selected by users themselves:
Travel switch: according to user's requirements, the pusher can be equipped with a mechanical travel switch.
use
ED series electro-hydraulic actuators are mainly used as operating components of YWZ4, YWZ5, YWZ8, YWZ9 and YWZP series electro-hydraulic block brakes, which are widely used in lifting and transportation, metallurgy, mining, ports, construction and other industries.
working conditions
Motor 1/2 three-phase AC asynchronous motor, in line with the provisions of (G 755-87), insulation grade: F.
Conditions of use
Continuous operation S1 and continuous operation S2, with the load duration FC=60%.
The rated voltage is 380V three-phase and the frequency is 50Hz.
The altitude grade of the place of use conforms to the standard (GB755-87).
The ambient temperature should be in the range of-20 C ~ 40, and the relative humidity of the air should not be greater than 90%. 5. Vertical installation: the piston connecting block is upward, and horizontal installation: the marked sign is upward: (ED630/12 is applicable to vertical installation)

Hot Tags: ed-23 electro hydraulic pusher, China, manufacturers, supplier, factory, customized, Electro Hydraulic Thruster Disc Brakes, hoist safety crane brake

Send Inquiry

(0/10)

clearall