+86-373-8614444
YW-E400/E80 Two-step Series Electro-hydraulic Drum Brakes video

YW-E400/E80 Two-step Series Electro-hydraulic Drum Brakes

🛠️ Product Overview: YW-E400/E80 Two-Step Drum Brake The YW-E series is an advanced "two-step" braking solution. Unlike standard brakes that apply full force immediately, this model first applies a gentle deceleration before clamping down fully. Model Number: YW-E400/E80 Type:...

Description

🛠️ Product Overview: YW-E400/E80 Two-Step Drum Brake

The YW-E series is an advanced "two-step" braking solution. Unlike standard brakes that apply full force immediately, this model first applies a gentle deceleration before clamping down fully.

Model Number: YW-E400/E80

Type: Two-Step / Electro-Hydraulic / Drum Brake

Action: Fail-Safe (Normally Closed) with Two-Stage Operation

Step 1 (Deceleration): Applies a smaller, adjustable force to slow down the mechanism smoothly.

Step 2 (Holding): After a delay, applies full spring force to securely hold the load.

Key Feature: Adjustable Delay & Smooth Stop. Prevents load swing and mechanical shock during stopping.

📋 Key Technical Specifications

 

Parameter Specification for YW-E400/E80
Brake Wheel Diameter 400 mm (Indicated by "400" in model)
Thruster Model Ed80 (Indicated by "E80" in model)
Rated Thrust ~8000 N (Approx., typical for Ed80 class)
Two-Step Delay 1 ~ 15 seconds (Adjustable via flow control valve)
Power Supply AC 380V / 50Hz (3-Phase, standard)
Applicable Standards JB/T 6406-2006, DIN 15435

✨ Key Features

Two-Step Braking: This is the core feature. The brake initially applies a reduced torque (adjustable) for a smooth stop. Once the mechanism is stationary, a second phase engages to provide full holding force.

Adjustable Delay Time: The time between the start of braking and the application of full force can be adjusted between 1 and 15 seconds using a throttle valve in the damping oil circuit.

Fail-Safe Design: Operates on a "Spring Applied" principle. If power fails, the brake automatically engages.

Equalizing Device: Features a "Linkage-type Equalizing Device" that ensures the clearance (distance) between both brake shoes and the drum remains equal without manual adjustment.

Self-Lubricating: Main pivot points use self-lubricating bushings/bearings, reducing maintenance needs.

🏭 Typical Applications

The YW-E400/E80 is ideal for machinery where sudden stops are dangerous or inefficient:

Outdoor Cranes: Large portal cranes and ship unloaders where it prevents the trolley from swinging after stopping and provides reliable wind-resistant parking.

Belt Conveyors: Used as a working brake to stop the conveyor smoothly without throwing the material.

Specialty Hoists: Any application requiring a soft landing or controlled deceleration.

💡 Operational & Maintenance Tips

Delay Adjustment: Use the check valve (throttle valve) in the hydraulic line to fine-tune the delay time according to your load requirements.

Torque Verification: The brake has a torque scale on the spring housing, allowing users to easily read and verify the set braking force without complex calculations.

Lining Replacement: The brake pads are clip-on type, making them quick and easy to replace when worn.

Hot Tags: yw-e400/e80 two-step series electro-hydraulic drum brakes, China, manufacturers, supplier, factory, customized, Port handling drum brake, riveted type crane drum brake, Port machinery Disc brake, Windproof drum brake, YW K series electro hydraulic drum brakes, Electrohydraulically released Drum Brakes

Send Inquiry

(0/10)

clearall