YWZ9-200/E23A ELECTRO HYDRAULIC And DRUM BRAKE

Dear, the clearance adjustment of electro-hydraulic drum brake needs to be carried out according to the following steps: 1. First, determine the correct installation position of the brake.

2. Open the brake and check the wear of the brake lining. If the lining has worn to the specified limit, it must be replaced.

3. Clean the inside of the brake to remove impurities such as scale and dust.

4. Ensure that there is no gap between the piston of the brake and the carbon trap.

5. Adjust the adjusting lever on the brake to the best forward position.

6. The position of the wheel axle must be accurately adjusted before the brake is firmly installed.

7. Adjust the position of the pistons so that they just touch the brake lining.

8. Install the brake according to the installation instructions of the brake.

9. After the installation of the brake is completed, adjust the oil supply and braking stroke of the brake. Note: The above steps are for reference only, and the specific adjustment methods may vary according to different situations. If you are not familiar with these steps, please ask professional technicians for help.

The adjustment method of drum brake is to shrink the brake shoe, increase the gap between the brake shoe and the brake drum, and then apply the service brake to make the gap between the brake shoe and the brake drum reach the specified value. When the push rod stroke of the brake air chamber is too large after the brake friction plate is worn, in order to reduce the gap between the shoe and the drum, only partial adjustment can be made by the cam. The adjustment method is: first, clockwise.

How to adjust drum brake
The adjustment method of drum brake is to shrink the brake shoe, increase the gap between the brake shoe and the brake drum, and then apply the service brake to make the gap between the brake shoe and the brake drum reach the specified value.

Hot Tags: ywz9-200/e23a electro hydraulic and drum brake, China, manufacturers, supplier, factory, customized, Series YW K acc to DIN 15 435, Plug in crane drum brake, Hydraulic Operated Brakes, Transport machinery drum brake, Metallurgical equipment drum brake, ED thrusters drum brake