YW-L Series Electro Hydraulic Drum Brake

The operating conditions of this series of brakes are as follows:

Altitude: <2000m;

Ambient temperature: -20°C~+40°C;

Relative humidity: ≤90%;

Work system: intermittent (S3-60%) and continuous (S1);

Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as required);

If there are special requirements, please negotiate and confirm when ordering.

Basic parameters:

Product model: YW-L200, YW-L250, YW-L315, YW-L400, YW-L500

Applicable wheel diameter: 200～500mm

Braking torque: 200～4100Nm

Outline and installation dimension

The brake is a mechanical part that stops or decelerates the moving parts in the machine. The brake is mainly composed of a frame, a brake and a control device. Some brakes are also equipped with automatic adjustment devices for the gap of the brakes.

In order to reduce the braking torque and the size of the structure, the brake is usually installed on the high-speed shaft of the equipment. However, large-scale equipment with high safety requirements (such as mine hoists, elevators, etc.) should be installed on the low-speed shaft near the working part of the equipment.

Technical data of YW-L series drum brakes

Hot Tags: yw-l series electro hydraulic drum brake, China, manufacturers, supplier, factory, customized, Special cranes drum brake, General bridge drum brake, Non lifting winch drum brake, Cart running machine drum brake, Riveting crane drum brake