Electro-hydraulic Drum Brakes

The principle of refueling must be to ensure that the electro-hydraulic push rod works normally. Method of refueling: Electrohydraulic push rod It is often used in places such as high altitude...

It is appropriate to add about 80 oil to the electric hydraulic propeller. According to the relevant public information, the temperature of hydraulic oil can't exceed 85 degrees, which determines...

Foreword In the development history of China's brake industry, the brake technology developed slowly before the mid-1980s.

Considering that the friction pair may produce mechanical deformation and thermal deformation during braking, the clearance of the brake in the cooling state should be determined by experiments....

Brake drum is the core component of hydraulic drum brake. It is a cylindrical metal piece, usually made of cast iron or steel. The outer surface of the brake drum is smooth, and there is a certain...

A typical drum brake is mainly composed of bottom plate, brake drum, brake shoe, brake wheel cylinder (brake cylinder), return spring, positioning pin and other parts. The bottom plate is...

For the adjustment method of electro-hydraulic block brake, please refer to: How to adjust the double-beam service brake?

Adjustment method of electro-hydraulic block brake 1. Adjustment of braking torque: Select an appropriate torque value within the rated value and 50% rated value as required. For the brake without...

The traditional electro-hydraulic drum brake test-bed is operated manually, so the test accuracy is insufficient and the labor intensity is high. In order to overcome the shortcomings of...

In order to further strengthen the material management of the brake factory, standardize personal behavior, define responsibilities and reduce material losses, this office is specially formulated.

Brake safety technology Brake is one of the important parts of crane. In the crane operation industry, it can make heavy objects hover in a certain position in the air; Or make the running...

The electric hydraulic brake is composed of two parts, the driving motor and the body (centrifugal pump). The body part is composed of cover, cylinder, piston, impeller and rotating shaft.