Products

Product Overview The YJGQ-20 is a compact, single-acting hydraulic rail clamp of the YJGQ family - the light-duty counterpart of ZYTJX-250 . Same working principle (disc-spring apply, hydraulic

The ZYTJX-250 is a hydraulic rail clamp - it does not brake a wheel with friction shoes. Instead, a disc-spring (diaphragm-spring) stack normally squeezes a hardened jaw pair onto both sides of the

DLZ40 Electro-Hydraulic Wheel Brake Direct Wheel-Rim Clamping - No Separate Brake Drum. DLZ40 grabs the wheel rim (tyre / flange) itself. No Ø400 brake drum to buy, machine, or mount - saves

YLZ series hydraulic wheel brakes ✔ Central Hydraulic - No Built-in Motor, No Electric Thruster. YLZ40 is released by external hydraulic pressure from your central hydraulic power unit. No Ed

YFX-400/80 Wind Storm Brake ✔ Iron Wedge, Not Friction Pad - When power fails, a hardened steel wedge drops UNDER the wheel onto the rail. Wheel rolls up the ramp and locks mechanically. Even if

TYWZ2-300 Series Manual Hydraulic Drum Brake Zero External Energy - Pure Human Power. One pedal + one hydraulic cylinder. No 380V, no compressor, no hydraulic power pack. 0 W / 0 scfm / 0 bar

TYW-315 Series Manual Hydraulic Drum Brake ✔ Zero External Energy - 100% Manual, Foot-Powered: No 380V electricity, no air compressor, no hydraulic power unit. A foot pedal + hydraulic cylinder +

DJPZ-04 Motor Disc Brake Fail-Safe, Spring-Applied - Power Off = Brake On. Normally closed. Annular disc spring (Belleville) holds braking torque; DC coil only to RELEASE. Blackout / emergency stop /

DCPZ-300 Electromagnetic Caliper Disc Brake ✔ Normally Open - Power ON = Clamp, Power OFF = Release: DCPZ-300 is a spring-release, DC-electromagnet-apply disc brake . With no power, the caliper pads

ZWZA200-160 Electromagnetic Drum Brake ✔ Pure DC, Spring-Applied, Power-Off = Brake-On ​ Normally closed. Main spring (in closed tube, dust-proof) holds 160 N·m at JC25% / 128 N·m at

MWZ200-160 Electromagnetic Drum Brake ✔ DC Magnet - No AC Hum, No Arc, Explosion-Friendlier ​ MWZ200-160 runs on DC 220V ​ through a DT-200 linear energy-saving electromagnet. No 50Hz alternating

JZ-200 AC Magnetic Block Brake ✔ Fail-Safe, Spring-Applied - Power Off = Brake On​ Normally closed. Main spring stores braking force; DT-200 AC electromagnet only works to RELEASE. On power loss,